








DESCRIPTION
The ExoSlide Extruder is a smooth-operating, lightweight, universal 3D printer extruder.
Extrude smoothly, with a unique design that provides uniform force on the filament with dual shaft constant mesh worm gears. Eliminate waviness in some prints from uneven gear meshing of other dual drive extruders.
Keep moving mass to a minimum with a low weight of just 208 grams, which also includes Nema 14 motor, 3010 fan, and M6x1 outlet adaptor.
Have hotend options, with the included universal titanium M6x1 outlet adaptor, or mount a Revo hotend with our included adaptor.
Mount easily, with direct mount to the ExoSlides with two M4x12 bolts, or use in your own application with the 4x M3 forward facing clearance holes. No more mounting extruders from the back side with hard to access screws!
The ExoSlide Extruder kit includes:
Extrude smoothly, with a unique design that provides uniform force on the filament with dual shaft constant mesh worm gears. Eliminate waviness in some prints from uneven gear meshing of other dual drive extruders.
Keep moving mass to a minimum with a low weight of just 208 grams, which also includes Nema 14 motor, 3010 fan, and M6x1 outlet adaptor.
Have hotend options, with the included universal titanium M6x1 outlet adaptor, or mount a Revo hotend with our included adaptor.
Mount easily, with direct mount to the ExoSlides with two M4x12 bolts, or use in your own application with the 4x M3 forward facing clearance holes. No more mounting extruders from the back side with hard to access screws!
The ExoSlide Extruder kit includes:
- Extruder with LDO Nema 14 motor
- SS Inlet PTFE adaptor
- Titanium heat break with M6x1 thread
- E3D Revo adaptor block
- 3010 Fan
- Stepper extension cable with PHR6 receptacle
- Thermal paste for heatbreak
- M4x12 bolts for mounting to ExoSlide carriage
- M2.5x5 bolts for Revo adaptor
- M3x16 bolts for fan
- Crimp ferrules for fan
SPECS
Weight: 208 grams (with motor and fan)
Dimensions: 77 x 49 x 47mm (with motor and fan)
E-steps: 480
Construction: Al body, SS drive gears, Ti M6x1 outlet
Dimensions: 77 x 49 x 47mm (with motor and fan)
E-steps: 480
Construction: Al body, SS drive gears, Ti M6x1 outlet