DESCRIPTION
Upgrade your CR10 X (hotend) and Z axis V-wheels with ExoSlides. This kit includes a second 500mm lead screw for dual Z lead screw operation, and is made to upgrade a CR10 with a single lead screw (a CR10S kit is also available for printers that come with two lead screws stock). This kit also includes a 2020 extrusion that is 510mm long (110mm longer than the 400mm outside-to-outside width of the vertical extrusions). If upgrading a printer other than a CR10 with this kit, a user sourced extrusion and/or lead screw may be needed.
Compared to V-wheels, ExoSlides offer less wheel wear, lower profile, more mounting options, and the possibility to make two parallel rails that are not over-constrained.
Say goodbye to having to repeatedly having to adjust V-wheel contact tension: the ExoSlides come pre-tensioned with a slight bearing preload, and will never need preload adjustment over the service life!
Also do away with V-wheel wear and dust: the ExoSlides have durable plastic treads that roll on the extrusion surface vs. the rolling and rubbing action of V-wheels.
The CR10 X (hotend) and Z Motion Kit includes:
For a complete list including every last nut and bolt, see the last page of the build guide document below.
The Creality CAD project page under the Guides section also has CAD (STEP and STL) models for common hotend modifications (Bondtech BMG direct drive, E3D hotend, 50mm blower with duct)
Note: The CR10 XZ Kit is a motion kit only (the extrusions and other transparent parts shown for reference)
Compared to V-wheels, ExoSlides offer less wheel wear, lower profile, more mounting options, and the possibility to make two parallel rails that are not over-constrained.
Say goodbye to having to repeatedly having to adjust V-wheel contact tension: the ExoSlides come pre-tensioned with a slight bearing preload, and will never need preload adjustment over the service life!
Also do away with V-wheel wear and dust: the ExoSlides have durable plastic treads that roll on the extrusion surface vs. the rolling and rubbing action of V-wheels.
The CR10 X (hotend) and Z Motion Kit includes:
- ExoSlide 20P, 4x
- ExoSlide 20S, 2x
- ExoSlide 40S, 1x
- ExoBracket 20, 2x
- Aluminum motor bracket, 1x
- Aluminum idler bracket, 1x
- Aluminum gantry bracket, 1x
- Aluminum hotend bracket, 1x
- Aluminum Z nut bracket, 2x
- Aluminum Z bearing bracket, 2x
- Printed endstop bracket, 1x
- Printed extruder bracket, 1x
- Printed Z support bracket, 1x
- Printed Z motor bracket, 1x
- Crimped X belt, 1x
- Closed Z belt, 1x
- 2020 x 510mm X extrusion, 1x
- TR8 500mm lead screw and nut, 1x
- Pillow bearing, 2x
- Pulley, 2x
- Bag of all nuts and bolts, 1x
For a complete list including every last nut and bolt, see the last page of the build guide document below.
The Creality CAD project page under the Guides section also has CAD (STEP and STL) models for common hotend modifications (Bondtech BMG direct drive, E3D hotend, 50mm blower with duct)
Note: The CR10 XZ Kit is a motion kit only (the extrusions and other transparent parts shown for reference)
SPECS
Build Volume: 300 x 300 x 400 (same as the stock CR10)