HOLIDAY SEASON SALE!


DESCRIPTION

Upgrade your CR10S X (hotend) and Z axis V-wheels with ExoSlides. This kit is designed for CR10S or similar printers that come with two lead screws stock (a CR10 kit is also available for printers that only come with one lead screws stock). This kit also includes a 2020 extrusion that is 510mm long (110mm longer than the 400mm outside-to-outside width of the vertical extrusions). If upgrading a printer other than a CR10S with this kit, a user sourced extrusion and/or lead screw may be needed.

Compared to V-wheels, ExoSlides offer less wheel wear, lower profile, more mounting options, and the possibility to make two parallel rails that are not over-constrained.

Say goodbye to having to repeatedly having to adjust V-wheel contact tension: the ExoSlides come pre-tensioned with a slight bearing preload, and will never need preload adjustment over the service life!

Also do away with V-wheel wear and dust: the ExoSlides have hard polycarbonate treads that roll on the extrusion surface vs. the rolling and rubbing action of V-wheels.

The CR10S X (hotend) and Z Motion Kit includes:
  • ExoSlide 20PC, 4x
  • ExoSlide 20S, 2x
  • ExoSlide 40S, 1x
  • ExoBracket 20, 2x
  • Aluminum motor bracket, 1x
  • Aluminum idler bracket, 1x
  • Aluminum gantry bracket, 1x
  • Aluminum hotend bracket, 1x
  • Aluminum Z nut bracket, 2x
  • Printed endstop bracket, 1x
  • Printed extruder bracket, 1x
  • Printed Z support bracket, 1x
  • Printed Z motor spacer bracket, 2x
  • Crimped X belt, 1x
  • 2020 x 440mm X extrusion, 1x
  • Bag of all nuts and bolts, 1x

For a complete list including every last nut and bolt, see the last page of the build guide document below.

The Creality CAD project page under the Guides section also has CAD (STEP and STL) models for common hotend modifications (Bondtech BMG direct drive, E3D hotend, 50mm blower with duct)

Note: The CR10S XZ Kit is a motion kit only (the extrusions and other transparent parts shown for reference)

SPECS

Build Volume: 300 x 300 x 400 (same as the stock CR10S)

DOCUMENTS

Creality_XZ_Build_Guide.pdf

REVIEWS

Submit a Review

CR10S XZ KIT

$99.99
OUT OF STOCK. BACK IN STOCK ON DEC 31
ADD TO CART

15 DAY MONEY-BACK GUARANTEE